PTFE Heat Shrinkable Tubing
Medical grade heat shrink tubing
Model: RSFR-MT-PTFE
Made from medical grade Polytetrafluoroethylene (PTFE), this RSFR-MT-PTFE medical-grade PTFE heat shrinkable tubing is an ideal option for medical applications where products have to be protected from heat, corrosion, shock, moisture and other conditions. Our medical-grade PTFE heat shrink tubing is featured by superior electrical properties, low friction coefficient, and highly resistant to solvents and high temperature. The consistency and high performance of PTFE are a result of its homogeneous structure, enabling the product essentially free from defects, pinholes, seams, cracks or flaws.
Features
- Shrink rate: non-shrinkable & 1.7:1
- Operating temperature: -65°C〜200°C
- Initial shrink temperature: ≥350℃
- Superior electrical insulation, physiologically inert
- Compliant with ISO 10993-1
- Meet ethylene oxide (ETO), Gamma sterilization
- Environmental standard: RoHS
- Standard color: transparent
Properties
| Performance | Test Standard | Standard Performance |
| Longitudinal change rate (%) | ASTM D 2671 | ≦15 |
| Tensile strength (MPa) | ASTM D 2671 | ≥19 |
| Elongation at break (%) | ASTM D 2671 | ≥200 |
| Breakdown strength (kV/mm) | IEC 243 | ≥26 |
| Volume resistivity (Ω.cm) | IEC 93 | ≥1014 |
| Flame retardant standard | ASTM D 2671 | VW-1 |
| Part No. | I.D (mm) | O.D (mm) (S) | O.D (mm) (T) | O.D (mm) (L) | Packaging Standard | |
| m/roll | m/pc | |||||
| AWG 30 | 0.30±0.10 | 0.80±0.10 | 0.70±0.10 | 0.60±0.10 | 305 | － |
| AWG 28 | 0.38±0.10 | 0.88±0.10 | 0.78±0.10 | 0.68±0.10 | 305 | － |
| AWG 26 | 0.46±0.10 | 0.96±0.10 | 0.86±0.10 | 0.76±0.10 | 305 | － |
| AWG 24 | 0.56±0.10 | 1.16±0.10 | 1.06±0.10 | 0.86±0.10 | 305 | － |
| AWG 23 | 0.66±0.10 | 1.26±0.10 | 1.16±0.10 | 0.96±0.10 | 305 | － |
| AWG 22 | 0.71±0.10 | 1.31±0.10 | 1.21±0.10 | 1.01±0.10 | 305 | － |
| AWG 21 | 0.81±0.10 | 1.41±0.10 | 1.31±0.10 | 1.11±0.10 | 305 | － |
| AWG 20 | 0.86±0.10 | 1.66±0.10 | 1.46±0.10 | 1.16±0.10 | 305 | － |
| AWG 19 | 0.96±0.20 | 1.76±0.20 | 1.56±0.20 | 1.26±0.20 | 200 | － |
| AWG 18 | 1.07±0.20 | 1.87±0.20 | 1.67±0.20 | 1.37±0.20 | 200 | － |
| AWG 17 | 1.19±0.20 | 1.99±0.20 | 1.79±0.20 | 1.49±0.20 | 200 | － |
| AWG 16 | 1.34±0.20 | 2.14±0.20 | 1.94±0.20 | 1.64±0.20 | 153 | － |
| AWG 15 | 1.50±0.20 | 2.30±0.20 | 2.10±0.20 | 1.80±0.20 | 153 | － |
| AWG 14 | 1.68±0.20 | 2.48±0.20 | 2.28±0.20 | 2.08±0.20 | 100 | － |
| AWG 13 | 1.93±0.20 | 2.73±0.20 | 2.53±0.20 | 2.33±0.20 | 100 | － |
| AWG 12 | 2.16±0.25 | 2.96±0.25 | 2.76±0.25 | 2.56±0.25 | 100 | － |
| AWG 11 | 2.41±0.25 | 3.21±0.25 | 3.01±0.25 | 2.81±0.25 | 150 | — |
| AWG 10 | 2.69±0.25 | 3.49±0.25 | 3.29±0.25 | 3.09±0.25 | 150 | — |
| AWG 9 | 3.00±0.25 | 4.00±0.25 | 3.80±0.25 | 3.40±0.25 | 150 | — |
| AWG 8 | 3.38±0.25 | 4.38±0.25 | 4.18±0.25 | 3.78±0.25 | 100 | — |
| AWG 7 | 3.76±0.25 | 4.76±0.25 | 4.56±0.25 | 4.16±0.25 | 100 | — |
| AWG 6 | 4.22±0.25 | 5.22±0.25 | 5.02±0.25 | 4.80±0.25 | 100 | — |
| AWG 5 | 4.72±0.25 | 5.72±0.25 | 5.52±0.25 | 5.32±0.25 | 50 | — |
| AWG 4 | 5.28±0.30 | 6.28±0.30 | 6.08±0.30 | 5.88±0.25 | 50 | 1.0m/pc |
| AWG 3 | 5.94±0.30 | 6.94±0.30 | 6.74±0.30 | 6.54±0.25 | — | 1.0m/pc |
| AWG 2 | 6.68±0.30 | 7.68±0.30 | 7.48±0.30 | 7.28±0.25 | — | 1.0m/pc |
| AWG 1 | 7.46±0.30 | 8.46±0.30 | 8.26±0.30 | 8.06±0.25 | — | 1.0m/pc |
| AWG 0 | 8.38±0.30 | 9.38±0.30 | 9.18±0.30 | 8.98±0.25 | — | 1.0m/pc |
| Part No. | As Supplied (mm) | After Recovery (mm) | Packaging Standard | ||
| I.D | I.D | W.T | m/roll | m/pc | |
| Ø1.0 | 1.0±0.2 | ≤0.6 | 0.20±0.05 | 200 | — |
| Ø1.5 | 1.5±0.2 | ≤0.9 | 0.20±0.05 | 200 | — |
| Ø2.0 | 2.0±0.2 | ≤1.3 | 0.20±0.05 | 200 | — |
| Ø2.5 | 2.5±0.2 | ≤1.5 | 0.20±0.05 | 200 | — |
| Ø3.0 | 3.0±0.2 | ≤1.8 | 0.20±0.05 | 200 | — |
| Ø3.5 | 3.5± 0.2 | ≤2.0 | 0.20±0.05 | 100 | — |
| Ø4.0 | 4.0± 0.3 | ≤2.5 | 0.25±0.05 | 100 | — |
| Ø4.5 | 4.5± 0.3 | ≤2.8 | 0.25±0.05 | 100 | — |
| Ø5.0 | 5.0± 0.3 | ≤3.0 | 0.25±0.05 | 100 | — |
| Ø6.0 | 6.0± 0.3 | ≤3.8 | 0.25±0.05 | 100 | — |
| Ø7.0 | 7.0± 0.3 | ≤4.0 | 0.25±0.05 | 100 | — |
| Ø8.0 | 8.0± 0.3 | ≤4.8 | 0.25±0.05 | — | 1.0m/pc |
| Ø9.0 | 9.0± 0.3 | ≤5.0 | 0.30±0.05 | — | 1.0m/pc |
| Ø10.0 | 10.0±0.3 | ≤5.8 | 0.30±0.05 | — | 1.0m/pc |
| Ø11.0 | 11.0±0.3 | ≤6.4 | 0.30±0.05 | — | 1.0m/pc |
| Ø12.0 | 12.0±0.3 | ≤7.0 | 0.30±0.05 | — | 1.0m/pc |
| Ø13.0 | 13.0±0.3 | ≤7.5 | 0.35±0.05 | — | 1.0m/pc |
| Ø14.0 | 14.0±0.3 | ≤8.0 | 0.35±0.05 | — | 1.0m/pc |
| Ø15.0 | 15.0±0.3 | ≤8.5 | 0.40±0.05 | — | 1.0m/pc |
| Ø16.0 | 16.0±0.3 | ≤9.0 | 0.40±0.05 | — | 1.0m/pc |
If you have questions about our products or want to request a quotation, please feel free to contact us at any time.
As an experienced manufacturer of heat shrink tubing and non-shrink tubing, WOER has a clear understanding of the industries requiring tubing and sleeving products used for electrical insulation, cable identification, wire bundling, environmental sealing and electronic component protection purposes. Whether you need electrical insulating tubing, wire harness tubing, heat shrink cable accessories, or other electrical application tubing products and cable identification products, we are a qualified source for your needs of heat shrinkable tubing products. WOER also provides superior value-added services such as cutting, printing and packaging to save your time and cost, so you can get your heat shrink tubes custom cut, printed and packaged.
- Heat Shrink Tubing
- Non Heat Shrink Tubing
- Marking System
- Medical Grade Heat Shrink Tubing
- FEP Heat Shrinkable Tubing, RSFR-MT-FEP
- PTFE Heat Shrinkable Tubing, RSFR-MT-PTFE
- PVDF Heat Shrinkable Tubing, RSFR-MT-PVDF
- Semi-rigid PVDF Heat Shrinkable Tubing, RSFR-MT-sPVDF
- Halogen-free LDPE Heat Shrinkable Tubing, RSFR-MT-90H-FZR
- Halogen-free LDPE Heat Shrinkable Tubing, RSFR-MT-90H-FZR-X
- Halogen-free HDPE Heat Shrinkable Tubing, RSFR-MT-105H
- Halogen-free Modified Polyolefin Heat Shrinkable Tubing, RSFR-MT-LWA-105H
- Halogen-free Flame-retardant Heat Shrinkable Tubing, RSFR-MT-125H-ZR
- XPE Foam
